Datasheet

https://www.phoenixcontact.com/us/products/1621729
May 3, 20171/10
Socket Outlet-EV-T2M3SE12-3AC32A-0,7M6,0E00-1621729
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in
the user's documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
Infrastructure Socket Outlet for charging electric vehicles with alternating current (AC), compatible
with Infrastructure Plugs, Type 2, IEC 62196-2, 32 A / 480 V (AC), 12 V Locking actuator, Single
wires, Length: 0.7 m, Screw connection of a hinged cover: Only rear mounting possible
Article description
Infrastructure Socket Outlet for charging electric vehicles (EV) with alternating current (AC), compatible with type 2 Infrastructure Plugs,
for installation at charging stations for E-Mobility (EVSE) 
Your advantages
Uniform, space-saving installation space of all Phoenix Contact Infrastructure Socket Outlets
Silver-plated surface of the power and signal contacts
Production in accordance with ISO TS 16949
Material data available in the IMDS (International Material Data System of the automotive industry)
Manual emergency release of the locking actuator
Integrated interlock during charging
Key commercial data
package_quantity
1
GTIN
4046356961523
Technical data
Product definition
Product type
Infrastructure Socket Outlet for charging electric vehicles with
alternating current (AC), compatible with Infrastructure Plugs
Type
Hinged cover screw connection at the rear
Standards/regulations
IEC 62196-2
Charging standard
Type 2
Charging mode
Mode 3, Case B
Type of charging current
AC 3-phase
Note on connection method
Crimp connection, cannot be disconnected
Dimensions
Height
96 mm
Width
75 mm
Depth
76.2 mm
Bore dimensions
60 mm x 60 mm
Conductor length
0.7 m (AC cables)