Brochure

26 PHOENIX CONTACT
Charging controllers for every
E-Mobility application
EV Charge Control Basic
EV Charge Control Basic is a compact, cost-effective
controller solution specifically for simple charging points:
• For setting up wall charging stations, for example
• For home garages, carports, and underground garages
AC charging points (IEC 61851-1) 1
AC charging points (DIN SPEC 70121/ISO 15118)
Charging case B, C
Vehicle connector release in the event of mains failure
•
Load and energy management
•
Programmable
TCP/IP communication
Mobile phone interface
OCPP 1.2/1.5
RS-485, Modbus RTU Slave
RS-232
CAN
Available as a printed-circuit board
•
The E-Mobility controllers from Phoenix
Contact enable the setup of charging
stations in accordance with current
requirements and standards, and ensure a
high degree of security and interoperability
with electric vehicles. Optimum controller
solutions are available for the entire range
of applications – private, commercial,
or public as well as AC or DC charging
technologies.
The charging controllers can be easily
combined with the EV-RCM residual
current modules.