Datasheet
https://www.phoenixcontact.com/us/products/1623597
May 3, 20171/5
AC charging cable-EV-
T1M3C-1AC32A-10M6,0ESBK00-1623597
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in
the user's documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
AC charging cable with Vehicle Connector, open cable end, with protective cap, Type 1, IEC
62196-2, SAE J1772, 32 A / 250 V (AC), Design line D-Line, Cable: 10 m, black, straight, NOTE:
Signal transmission is dependent on the cable length and may be adversely affected., Mating face:
gray, Handle area: gray
Article description
AC charging cable with Vehicle Connector and open cable end for charging electric vehicles (EV) with alternating current (AC) via type 1
Vehicle Inlets, for installation at charging stations for E-Mobility (EVSE)
Your advantages
Uniform design of all Phoenix Contact Vehicle Connectors and Infrastructure Plugs
Silver-plated surface of the power and signal contacts
Production in accordance with ISO TS 16949
Material data available in the IMDS (International Material Data System of the automotive industry)
Ergonomic handle
Key commercial data
package_quantity
1
GTIN
4055626172026
Technical data
Product definition
Product type
AC charging cable with Vehicle Connector, open cable end, with
protective cap
Type
D-Line
Standards/regulations
IEC 62196-2
Standards/regulations
SAE J1772
Charging standard
Type 1
Charging mode
Mode 3, Case C
Type of charging current
AC single-phase
Note
NOTE: Signal transmission is dependent on the cable length and
may be adversely affected.
Dimensions
Vehicle connector width
55.20 mm
Vehicle connector height
72.60 mm
Vehicle connector depth
235.90 mm