Datasheet

https://www.phoenixcontact.com/us/produkte/1636088
Nov 12, 20131/7
Contact insert-HC-M-EMV-ST/3-9,5-1636088
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in
the user's documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
HEAVYCON EMC connector, pin version, 4-pos., for connecting shielded conductors with 3 - 9.5 mm
external conductor diameter. For use in the HC-M-EMV-MOD-ST plastic module

Key commercial data
package_quantity
1
GTIN
4017918962920
Technical data
Electrical characteristics
Note
The potential of the EMC connector housing is isolated from the
potential of the heavy connector.
Note
For CK 1,6...ED... crimp contacts (note in scope of delivery)
Note
Clamps for the clamping range of 4 mm - 6 mm and 6 mm - 9 mm
Rated voltage (III/3)
50 V
Rated current
10 A
Rated surge voltage
0.8 kV
Number of positions
4
Ambient conditions
Ambient temperature (operation)
-40 °C ... 85 °C
Mechanical characteristics
Conductor cross section
0.14 mm² ... 2.5 mm²
Connection cross section AWG
26 ... 14
Stripping length of the individual wire
8 mm (6 mm (for 2.5 mm²))
External cable diameter
4 mm ... 9 mm
Wire diameter including insulation
2.4 mm
Insertion/withdrawal cycles
≥ 500
General
Series
HC-M-EMV
Number of module slots
2
Connection method
Crimp connection
Inflammability class according to UL 94
V0
Pollution degree
3
Surge voltage category
III