Datasheet

https://www.phoenixcontact.com/us/produkte/1636350
Nov 12, 20131/7
Contact insert-HC-K 6/12-ESTS-1636350
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in
the user's documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
HEAVYCON male insert, K6/12 series, with 6 power (axial screw connection) and 12 control contacts
(screw connection)

Key commercial data
package_quantity
1
GTIN
4046356011495
Technical data
General
Note
For HEAVYCON ADVANCE and HEAVYCON housing of type
B16/B32, axial connection for 2 mm Allen wrench
Connection method
Axial screw connection (power contacts)
Connection method
Signal Screw connection
Tightening torque
1.5 Nm (Power contacts 2.5 - 4 mm²)
Tightening torque
0.8 Nm (control contacts)
Tightening torque
2 Nm (Power contacts 6 -8 mm²)
Pollution degree
3
Surge voltage category
III
Number of positions
6+12+PE
No. of power contacts
6
No. of control contacts
12
Insertion/withdrawal cycles
≥ 500
Design
B16
Conductor cross section
2.5 mm² ... 8 mm²
Conductor cross section
0.2 mm² ... 2.5 mm²
Connection cross section AWG
12 ... 10
Connection cross section AWG
24 ... 14 (control contacts)
Stripping length of the individual wire
8 mm +1 (Power contacts, 2.5 - 8mm²)
Stripping length of the individual wire
10 mm (control contacts)
Wire diameter including insulation
6.2 mm (Max., power contacts)
Assembly instructions
-The axial screw connection must be established using a 2 mm
Allen wrench.-Use only stranded wires for axial screw connection.-
Plug-in connections may only be operated only when there is no
load/voltage.