Datasheet

https://www.phoenixcontact.com/us/produkte/1679456
Nov 12, 20131/5
Contact insert-HC-D 7-ESTC-R-1679456
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in
the user's documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)

Key commercial data
package_quantity
10
GTIN
4017918163686
Technical data
General
Note
For HC-D7 housing, crimp contacts CK1,6-ER (crimp contacts not
included in scope of supply)
Connection method
Crimp connection
Pollution degree
3
Surge voltage category
III
Constructional and testing regulations
DIN VDE 0627/86
Constructional and testing regulations
DIN VDE 0110/02.79
Constructional and testing regulations
DIN VDE 0110-1/04.97
Constructional and testing regulations
IEC 60664-1, DIN IEC 60512
Constructional and testing regulations
IEC 60352
Number of positions
7+PE
Insertion/withdrawal cycles
≥ 500
Design
D7
Connection in acc. with standard
IEC / EN
Conductor cross section
0.14 mm² ... 1.5 mm²
Connection cross section AWG
26 ... 16
Stripping length of the individual wire
3 mm +0,5 (0.14 mm² ... 0.5 mm²)
Stripping length of the individual wire
3.5 mm +1 (0.5 mm² ... 1.5 mm²)
Assembly instructions
Connectors may be operated only when there is no load/voltage.
Connection
The inserts may only be used in plastic housings at voltages >42
V, since it is not possible to connect the protective conductor and
the housing with each other.
Ambient conditions
Ambient temperature (operation)
-40 °C ... 125 °C (including heating up of contacts)
Material data