Brochure

No. of pos. Dim. a
[mm]
2 5.00
3 10.00
4 15.00
2 5.08
3 10.16
4 15.24
2 5.08
3 10.16
2 5.08
3 10.16
2 5.08
3 10.16
96 PHOENIX CONTACT
Notes:
In order to avoid tolerances between the terminal blocks and PCB,
the terminal row should be interrupted when the number of posi-
tions exceeds 30.
1
) Please observe the current carrying capacity curves. Other cur-
rent carrying capacity curves are available on request.
– Standard PCB terminal blocks with 5.0
or 5.08 mm pitch
MKDS 3/...-B-5,08
– Distributor terminal block with an inter-
nally bridged soldering metal
– Common potentials can be looped
through irrespective of the conductive
path
MKDSP 3/...
– With integrated test connection to ac-
commodate 2 mm Ø test pins or
2.3 mm Ø test plugs
Connection cross section of up to
2.5 mm
2
Technical data
MKDS 3/... MKDS 3/...-B-5,08 MKDSP 3/...
Technical data according to IEC/DIN VDE
Rated current / conductor cross section [A] / [mm²] 24
1
) / 2.5 24
1
) / 2.5 24
1
) / 2.5
Rated insulation voltage for pollution degree 2 [V] 400 400 400
Pitch [mm] 5 / 5.08 5.08 5 / 5.08
Connection capacity
Solid / stranded [mm²] / [mm²] / AWG 0.2 - 4 / 0.2 - 2.5 / 24 - 12 0.2 - 4 / 0.2 - 2.5 / 24 - 12 0.2 - 4 / 0.2 - 2.5 / 24 - 12
Stranded with ferrules without plastic sleeve [mm
2
] 0.25 - 2.5 0.25 - 2.5 0.25 - 2.5
Stranded with ferrules with plastic sleeve [mm
2
] 0.25 - 2.5 0.25 - 2.5 0.25 - 2.5
Multi-conductor connection capacity (two conductors with the same cross section)
Solid / stranded [mm
2
] 0.2 - 1.5 / 0.2 - 1.5 0.2 - 1.5 / 0.2 - 1.5 0.2 - 1.5 / 0.2 - 1.5
Stranded with ferrules without plastic sleeve [mm
2
] 0.25 - 0.75 0.25 - 0.75 0.25 - 0.75
Stranded with TWIN ferrule with plastic sleeve [mm
2
] 0.5 - 1.5 0.5 - 1.5 0.5 - 1.5
Insulation coordination
Surge voltage category / pollution degree III / 3 III / 2 II / 2 III / 3 III / 2 II / 2 III / 3 III / 2 II / 2
Rated insulation voltage [V] 250 400 630 250 400 630 250 400 630
Rated surge voltage [kV] 4 4 4 4 4 4 4 4 4
Approval data (UL/CUL) Use Group B C D B C D B C D
Nominal voltage [V] 300 - 300 300 - 300 250 - 300
Nominal current [A] 15 - 10 15 - 10 15 - 10
Connection capacity AWG AWG 30 - 12 - 30 - 12 30 - 12 - 30 - 12 30 - 12 - 30 - 12
Approval data (CSA) Use Group B C D B C D B C D
Nominal voltage [V] 300 - 300 300 - 300 300 - 300
Nominal current [A] 10 - 10 10 - 10 10 - 10
Connection capacity AWG AWG 28 - 12 - 28 - 12 28 - 12 - 28 - 12 28 - 12 - 28 - 12
General data
Stripping length [mm] 8 8 8
Screw thread M3 M3 M3
Tightening torque [Nm] 0.5 - 0.6 0.5 - 0.6 0.5 - 0.6
Type of insulation material / insulation material group PA / I PA / I PA / II
Inflammability class according to UL 94 V0 V0 V0
Drill hole diameter / pin dimensions [mm] 1.3 / 0.9 x 0.9 mm 1.3 / 0.9 x 0.9 mm 1.3 / 0.9 x 0.9 mm
For all types Type Page
Marker cards
SK 5/3,8 or SK 5,08/3,8
842
Screwdriver
SZS 0,6 x 3,5
Order No.
1205053
Insertion bridge
EBP...- 5
853
Single cover for individu-
al terminal positions
EA-MKDS
Order No.
1711408
Only for MKDS 3
Pitch spacer, width:
1.25 mm
RZ 1,25-MKDS 3
Order No.
1703047
Only for MKDSP 3
Test plug
MPS
855
Accessories
100806040200
48
56
24
32
40
8
16
0
4 mm
2
Ambient temperature [°C]
Current
c
arrying
capa
city [A]
Current carrying capacity curve
Type: MKDS 3/2 and MKDS 3/3
Tested in accordance with DIN EN 60512-5-2:2003-01
Reduction factor = 1
No. of positions: 5
Metric 5 mm pitch Detection lug for
models with a 5.08 mm inch pitch
PCB terminal blocks for MCR technology - COMBICON control
PCB terminal blocks with screw connection for wave soldering processes, currents of up to 32 A