Brochure
Without side panels,
plug-in direction parallel to the PCB
Ordering data
Type Order No. Pcs. / Pkt.
No. of pos. Dim. a
[mm]
5.0 mm pitch, color: green
2 5.00 MSTB 2,5/ 2-G
1754436 50
3 10.00 MSTB 2,5/ 3-G
1754452 50
4 15.00 MSTB 2,5/ 4-G
1754478 50
5 20.00 MSTB 2,5/ 5-G
1754494 50
6 25.00 MSTB 2,5/ 6-G
1754517 50
7 30.00 MSTB 2,5/ 7-G
1754533 50
8 35.00 MSTB 2,5/ 8-G
1754559 50
9 40.00 MSTB 2,5/ 9-G
1754575 50
10 45.00 MSTB 2,5/10-G
1754591 50
11 50.00 MSTB 2,5/11-G
1754614 50
12 55.00 MSTB 2,5/12-G
1754630 50
13 60.00 MSTB 2,5/13-G
1754656 50
14 65.00 MSTB 2,5/14-G
1754672 50
15 70.00 MSTB 2,5/15-G
1754698 50
16 75.00 MSTB 2,5/16-G
1754711 50
5.08 mm pitch, color: green
2 5.08 MSTB 2,5/ 2-G-5,08
1759017 50
3 10.16 MSTB 2,5/ 3-G-5,08
1759020 50
4 15.24 MSTB 2,5/ 4-G-5,08
1759033 50
5 20.32 MSTB 2,5/ 5-G-5,08
1759046 50
6 25.40 MSTB 2,5/ 6-G-5,08
1759059 50
7 30.48 MSTB 2,5/ 7-G-5,08
1759062 50
8 35.56 MSTB 2,5/ 8-G-5,08
1759075 50
9 40.64 MSTB 2,5/ 9-G-5,08
1759088 50
10 45.72 MSTB 2,5/10-G-5,08
1759091 50
11 50.80 MSTB 2,5/11-G-5,08
1759101 50
12 55.88 MSTB 2,5/12-G-5,08
1759114 50
13 60.96 MSTB 2,5/13-G-5,08
1759127 50
14 66.04 MSTB 2,5/14-G-5,08
1759130 50
15 71.12 MSTB 2,5/15-G-5,08
1759143 50
16 76.20 MSTB 2,5/16-G-5,08
1759156 50
286 PHOENIX CONTACT
2
a
5
1,4
2,5
(5,08)
(2,54)
! " # $
Notes:
In accordance with DIN EN 61984, COMBICON connectors have
no switching power. During designated use, they must not be
plugged in or disconnected when carrying voltage or under load.
COMBICON select
Possible combinations for plug-in connectors can be found in
COMBICON select at www.phoenixcontact.net/catalog or
starting on page 164.
Mounting screws for MSTB 2,5/...-GF(-5,08): sheet metal screw
ISO 1481-ST 2,2x6,5 C or ISO 7049-ST 2,2x6,5 C. Screw connec-
tion only permitted prior to soldering.
1
) MSTB 2,5/...-G and MSTBA 2,5/....-G from 2 to 12-pos.: insula-
tion material type/insulation material group = PA/I; more than 12-
pos.: insulation material type/insulation material group = PBT/IIIa
– Standard pin strip for 320 V (III/2)
– Plug-in direction parallel to the conduc-
tor axis
– Versions with and without side panel
– W-type with stand-off
– Versions with and without threaded
flange
– Other pin lengths available on request
– For larger numbers of positions up to
24-pos., visit:
www.phoenixcontact.net/catalog
22
12
8,6
2
15
3,5
2,5
(2,54)
a
a+5
(a+5,08)
5
(5,08)
Single-level headers for wave
soldering processes
Technical data
Technical data according to IEC/DIN VDE
Rated current / conductor cross section [A] / [mm²] 12 / -
Rated insulation voltage for pollution degree 2 [V] 320
Pitch [mm] 5 / 5.08
Insulation coordination
Surge voltage category / pollution degree III / 3 III / 2 II / 2
Rated insulation voltage [V] 250 320 400
Rated surge voltage [kV] 4 4 4
Approval data (UL/CUL) Use Group B C D
Nominal voltage [V] 250 - 300
Nominal current [A] 12 - 10
Connection capacity AWG AWG - - -
Approval data (CSA) Use Group B C D
Nominal voltage [V] 300 - 300
Nominal current [A] 10 - 10
Connection capacity AWG AWG - - -
General data
Type of insulation material / insulation material group PBT / IIIa
1
)
Inflammability class according to UL 94 V0
Drill hole diameter / pin dimensions [mm] 1.4 / 1 x 1 mm
For all types Type Page
Marker cards
SK 5/3,8 or SK 5,08/3,8
842
Keying section
CR-MSTB
Order No.
1734401
38
Keying tab
MSTB-BL
Order No.
1755477
861
Only for MSTB 2,5/...-G
Mounting flange
MSTB-BF
Order No.
1759981
860
Accessories
Plug-in connectors for MCR technology - COMBICON control
CLASSIC COMBICON plug-in connectors with 5.0 or 5.08 mm pitch
Dimensional drawing Dimensional drawing Dimensional drawing Dimensional drawing
Drilling diagram Drilling diagram Drilling diagram Drilling diagram