Brochure
With engagement noses,
plug-in direction parallel to the PCB
Ordering data
Type Order No. Pcs. / Pkt.
No. of pos. Dim. a
[mm]
5.0 mm pitch, color: green
2 5.00 MSTBA 2,5/ 2-G-RN
1944783 50
3 10.00 MSTBA 2,5/ 3-G-RN
1944796 50
4 15.00 MSTBA 2,5/ 4-G-RN
1944806 50
5 20.00 MSTBA 2,5/ 5-G-RN
1944819 50
6 25.00 MSTBA 2,5/ 6-G-RN
1944822 50
7 30.00 MSTBA 2,5/ 7-G-RN
1944835 50
8 35.00 MSTBA 2,5/ 8-G-RN
1944848 50
9 40.00 MSTBA 2,5/ 9-G-RN
1944851 50
10 45.00 MSTBA 2,5/10-G-RN
1944864 50
11 50.00 MSTBA 2,5/11-G-RN
1944877 50
12 55.00 MSTBA 2,5/12-G-RN
1944880 50
13 60.00 MSTBA 2,5/13-G-RN
1944893 50
14 65.00 MSTBA 2,5/14-G-RN
1944903 50
15 70.00 MSTBA 2,5/15-G-RN
1944916 50
16 75.00 MSTBA 2,5/16-G-RN
1944929 50
5.08 mm pitch, color: green
2 5.08 MSTBA 2,5/ 2-G-5,08-RN
1926015 50
3 10.16 MSTBA 2,5/ 3-G-5,08-RN
1926028 50
4 15.24 MSTBA 2,5/ 4-G-5,08-RN
1926031 50
5 20.32 MSTBA 2,5/ 5-G-5,08-RN
1926044 50
6 25.40 MSTBA 2,5/ 6-G-5,08-RN
1926057 50
7 30.48 MSTBA 2,5/ 7-G-5,08-RN
1926060 50
8 35.56 MSTBA 2,5/ 8-G-5,08-RN
1926073 50
9 40.64 MSTBA 2,5/ 9-G-5,08-RN
1926086 50
10 45.72 MSTBA 2,5/10-G-5,08-RN
1926099 50
11 50.80 MSTBA 2,5/11-G-5,08-RN
1926109 50
12 55.88 MSTBA 2,5/12-G-5,08-RN
1926112 50
13 60.96 MSTBA 2,5/13-G-5,08-RN
1926125 50
14 66.04 MSTBA 2,5/14-G-5,08-RN
1926138 50
15 71.12 MSTBA 2,5/15-G-5,08-RN
1926141 50
16 76.20 MSTBA 2,5/16-G-5,08-RN
1926154 50
288 PHOENIX CONTACT
2
a
3,5
1,4
5
(5,08)
(3,54)
1,91
! "
Notes:
In accordance with DIN EN 61984, COMBICON connectors have
no switching power. During designated use, they must not be
plugged in or disconnected when carrying voltage or under load.
COMBICON select
Possible combinations for plug-in connectors can be found in
COMBICON select at www.phoenixcontact.net/catalog or
starting on page 164.
Mounting screws for MSTBV 2,5/...-GEH-5,08: sheet metal screw
ISO 1481-ST 2,2x6,5 C or ISO 7049-ST 2,2x6,5 C. Screw connec-
tion only permitted prior to soldering.
1
) MSTBV 2,5/...-G and MSTBVA 2,5/...-G from 2 to 12-pos.: insu-
lation material type/insulation material group = PA/I; more than 12-
pos.: insulation material type/insulation material group = PBT/IIIa
– Standard pin strip for 320 V (III/2)
– Plug-in direction parallel and vertical to
the PCB
– Versions with and without side panel
– Versions with threaded flange
– Versions with release aid
– Versions with engagement noses for
locking connectors with self-locking
flanges
– Other pin lengths available on request
– For larger numbers of positions up to
24-pos., visit:
www.phoenixcontact.net/catalog
2
3,5
12
8,6
a+7
(a+7,08)
a
3,5
1,91
5
(3,54)
(5,08)
Single-level headers for wave
soldering processes
Technical data
Technical data according to IEC/DIN VDE
Rated current / conductor cross section [A] / [mm²] 12 / -
Rated insulation voltage for pollution degree 2 [V] 320
Pitch [mm] 5 / 5.08
Insulation coordination
Surge voltage category / pollution degree III / 3 III / 2 II / 2
Rated insulation voltage [V] 250 320 400
Rated surge voltage [kV] 4 4 4
Approval data (UL/CUL) Use Group B C D
Nominal voltage [V] 250 - 300
Nominal current [A] 12 - 10
Connection capacity AWG AWG - - -
Approval data (CSA) Use Group B C D
Nominal voltage [V] - - -
Nominal current [A] - - -
Connection capacity AWG AWG - - -
General data
Type of insulation material / insulation material group PBT / IIIa
1
)
Inflammability class according to UL 94 V0
Drill hole diameter / pin dimensions [mm] 1.4 / 1 x 1 mm
For all types Type Page
Marker cards
SK 5/3,8 or SK 5,08/3,8
842
Keying section
CR-MSTB
Order No.
1734401
38
Keying tab
MSTB-BL
Order No.
1755477
861
Nur für MSTBV 2,5/...-G
Mounting flange
MSTB-BF
Order No.
1759981
860
Accessories
Plug-in connectors for MCR technology - COMBICON control
CLASSIC COMBICON plug-in connectors with 5.0 or 5.08 mm pitch
Dimensional drawing Dimensional drawing Dimensional drawing Dimensional drawing
Drilling diagram Drilling diagram Drilling diagram Drilling diagram