Datasheet

https://www.phoenixcontact.com/us/produkte/1773446
Nov 13, 20131/4
Contact insert-HC-HV 16-EBUS-1773446
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in
the user's documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
The illustration shows a
combination of versions HC-HV
-10-EBUC, -10-EBUS, -10-ESTC
and -10-ESTS
HEAVYCON female insert, for 690 V(III/3), with 16 N/O contacts and 2 switching contacts, screw
connection

Key commercial data
package_quantity
10
GTIN
4017918144470
Technical data
General
Note
For HEAVYCON-ADVANCE housing of type B24 and HEAVYCON
housing of type HV10; when using a ferrule, the wire protection
must be removed and a 10 mm long ferrule must be used.
Connection method
Screw connection
Tightening torque
0.5 Nm
Pollution degree
3
Surge voltage category
III
Constructional and testing regulations
DIN VDE 0627/86
Constructional and testing regulations
DIN VDE 0110/02.79
Constructional and testing regulations
DIN VDE 0110-1/04.97
Constructional and testing regulations
IEC 60664-1, DIN IEC 60512
Constructional and testing regulations
IEC 60352
Number of positions
16+2+PE
Insertion/withdrawal cycles
≥ 500
Design
HV16
Connection in acc. with standard
IEC / EN
Conductor cross section
0.5 mm² ... 2.5 mm²
Connection cross section AWG
20 ... 14
Stripping length of the individual wire
7 mm (N/O contacts)
Stripping length of the individual wire
7 mm (control contacts)
Assembly instructions
When using a ferrule, the wire protection in the terminal point must
be removed and a 10 mm long ferrule must be used.
Ambient conditions