Datasheet

https://www.phoenixcontact.com/us/produkte/1855076
Nov 13, 20131/10
Contact insert-VC-D3-BU50-PE-1855076
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in
the user's documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
Female contact carrier, for turned crimp contacts, type VC 3, 50-pos. + PE

Product Features
Positions 15, 30, 50, and 65 are available, in accordance with housing sizes VC 1 - VC 4.
Contact types meet the requirements of IEC 60352/DIN EN 60352
Contact carriers have two further capacitive PE contacts
Pin and socket contacts can be used on both the plug and device sides
The connection data of 250 V/10 A corresponds to that of the HEAVYCON DD series
Key commercial data
package_quantity
10
GTIN
4017918159368
Technical data
Electrical characteristics
Note
Connectors may only be connected/disconnected when under no
load.
Rated voltage
250 V
Rated voltage (III/3)
250 V
Rated current
10 A
Rated current
10 A
Rated surge voltage
4 kV
Number of positions
50
Ambient conditions
Ambient temperature (operation)
-40 °C ... 125 °C
Mechanical characteristics
Conductor cross section
0.14 mm² ... 1.5 mm² (stranded)
Connection cross section AWG
22 ... 16
Stripping length of the individual wire
8 mm
Conductor cross section stranded max.
1.5 mm²
Insertion/withdrawal cycles
>= 500
General
Design
VC3