Datasheet

https://www.phoenixcontact.com/us/produkte/2313452
Nov 14, 20132/11
Interface converters-FL COMSERVER UNI
232/422/485-2313452
Technical data
Serial interface
Interface 1
Ethernet interface, 10/100BASE-T(X) in acc. with IEEE 802.3u
Interface
Ethernet
Connection method
RJ45 socket, shielded
Transmission length
≤ 100 m (shielded twisted pair)
Protocols supported
TCP/IP, UDP, Modbus (TCP, RTU/ASCII), PPP
Auxiliary protocols
ARP, DHCP, BOOTP, SNMP, RIP, RARP, HTTP, TFTP
Data flow control/protocols
Modbus TCP
Serial transmission speed
10/100 Mbps, autonegotiation
Interface 2
V.24 (RS-232) interface in acc. with ITU-T V.28, EIA/TIA-232, DIN
66259-1
Interface
V.24 (RS-232)
Connection method
D-SUB-9 male connector
File format/coding
UART/NRZ: 7/8 bit data, 1/2 bit stop, 1 bit parity
Transmission length
15 m
Pin assignment
DTE/DCE switchover via web-based management
Data flow control/protocols
Software handshake, Xon/Xoff, or hardware handshake RTS/
CTS // 3964 R compatible, Modbus RTU/ASCII
Serial transmission speed
0.3; 0.6; 1.2; 2.4; 4.8; 7.2; 9.6; 19.2; 38.4; 57.6; 115.2; 187.5;
230.4 kbps
Interface 3
RS-422 interface in acc. with ITU-T V.11, EIA/TIA-422, DIN
66348-1
Interface
RS-422
Connection method
Plug-in/screw connection via COMBICON
File format/coding
Serial asynchronous UART/NRZ, 7/8 data, 1/2 stop, 1 parity,
10/11-bit character length
Transmission length
≤ 1200 m
Termination resistor
390 Ω (configurable)
Termination resistor
180 Ω
Termination resistor
390 Ω
Data flow control/protocols
Automatic control
Serial transmission speed
0.3; 0.6; 1.2; 2.4; 4.8; 7.2; 9.6; 19.2; 38.4; 57.6; 115.2; 187.5;
230.4; 500; 1000 kbps
Interface 4
RS-485 interface, in acc. with EIA/TIA-485, DIN 66259-4/RS-485
2-wire
Interface
RS-485
Connection method
Plug-in/screw connection via COMBICON
File format/coding
Serial asynchronous UART/NRZ, 7/8 data, 1/2 stop, 1 parity,
10/11-bit character length
Termination resistor
390 Ω
Termination resistor
180 Ω
Termination resistor
390 Ω (configurable)
Data flow control/protocols
Automatic control