Instructions
Table Of Contents
- Please observe the following notes
- Table of contents
- 1 Description of the SHDSL permanent line modem
- 2 Hardware installation
- 3 Configuration via PSI-CONF
- 4 Optimization
- 5 Eliminating errors
Hardware installation
104275_en_c00 PHOENIX CONTACT 2-5
2.3 Establishing connections
2.3.1 Safety notes
WARNING: Electrical connection may only be carried out by qualified personnel
The electrical connection, startup, and operation of this device may only be performed by
qualified personnel.
With respect to the safety notes in this document, qualified personnel are persons who are
authorized to start up, to ground, and to mark devices, systems, and equipment according
to the standards of safety technology. In addition, these persons must be familiar with all
warning instructions and maintenance measures in this document.
Disregarding these instructions may result in damage to equipment and/or serious per-
sonal injury.
WARNING: SELV operation
The PSI-MODEMSHDSL/SERIAL is designed exclusively for SELV operation according
to IEC 60950/EN 60950/VDE 0805.
WARNING:
The modem may only be connected to devices which meet the requirements of EN 60950
(Safety of information technology equipment).