Instructions
Table Of Contents
- Please observe the following notes
- Table of contents
- 1 Description of the SHDSL permanent line modem
- 2 Hardware installation
- 3 Configuration via PSI-CONF
- 4 Optimization
- 5 Eliminating errors
PSI-MODEMSHDSL/SERIAL
3-10
PHOENIX CONTACT 104275_en_c00
Step 7: Transfer Online mode is activated automatically for the transfer.
• Select the first configured device and connect it via the USB cable.
• Wait until communication is established with the device. A window containing a prog-
ress bar appears briefly.
• Click on "Transfer" to transfer the data to the device connected via USB.
• After successful transfer, a green bar appears displaying "Transferred" and the serial
number of the device. A USB symbol also appears.
• Select the next device and connect it via the USB cable.
• Wait until communication is established with the device. A window containing a prog-
ress bar appears briefly.
• Click on "Transfer" to transfer the data to the device connected via USB.
Repeat the steps until all devices are configured.
• Click on "Finish" to save the configuration file.
Configuration >> Point-to-point wizard or Line structure wizard