Datasheet

https://www.phoenixcontact.com/gb/products/2320568
06/18/2019Page3/11
DC/DC converter, protective coating-QUINT-PS/24DC/24DC/20/
CO-2320568
Technical data
Output data
< 0.1 % (change in input voltage ±10 %)
Residual ripple
< 20 mV
PP
Peak switching voltages nominal load
< 10 mV
PP
(20MHz)
Maximum power dissipation in no-load condition 2.2 W
Power loss nominal load max. 39 W
General
Net weight 1.7 kg
Efficiency > 92 %
Insulation voltage input/output 1.5 kV (type test)
1 kV (routine test)
Protection class III
Degree of protection IP20
> 554000 h (40°C)
Mounting position horizontal DIN rail NS 35, EN 60715
Assembly instructions
alignable: P
N
≥50%, 5mm horizontally, 15mm next to active
components, 50mm vertically
alignable: P
N
<50%, 0mm horizontally, 40mm vertically top, 20 mm
vertically bottom
Connection data, input
Connection method Screw connection
Conductor cross section solid min. 0.5 mm²
Conductor cross section solid max. 16 mm²
Conductor cross section flexible min. 0.5 mm²
Conductor cross section flexible max. 16 mm²
Conductor cross section AWG min. 8
Conductor cross section AWG max. 6
Stripping length 10 mm
Screw thread M3
Connection data, output
Connection method Screw connection
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 6 mm²
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 4 mm²
Conductor cross section AWG min. 12
Conductor cross section AWG max. 10
Stripping length 8 mm
Screw thread M3