Datasheet

https://www.phoenixcontact.com/gb/products/2320908
06/18/2019Page3/10
Power supply, with protective coating-QUINT-PS/1AC/24DC/ 5/
CO-2320908
Technical data
Output data
Nominal output current (I
N
) 5 A (-25°C...60°C, U
OUT
=24VDC)
POWER BOOST (I
Boost
) 7.5 A (-25°C...40°C permanent, U
OUT
= 24VDC )
Selective Fuse Breaking (I
SFB
)
30 A (12 ms)
Derating 60 °C ... 70 °C (2.5%/K)
Connection in parallel Yes, for redundancy and increased capacity
Connection in series yes
Feedback resistance max. 35 V DC
Output overvoltage protection < 32 V DC
Control deviation < 1 % (change in load, static 10 % ... 90 %)
< 2 % (change in load, dynamic 10 % ... 90 %)
< 0.1 % (change in input voltage ±10 %)
Residual ripple
< 40 mV
PP
(with nominal values)
Output power 120 W
Typical response time < 0.15 s
Maximum power dissipation in no-load condition 3 W
Power loss nominal load max. 15 W
General
Net weight 0.7 kg
Efficiency > 90 % (for 230 V AC and nominal values)
Insulation voltage input/output 4 kV AC (type test)
2 kV AC (routine test)
Insulation voltage input / PE 3.5 kV AC (type test)
2 kV AC (routine test)
Insulation voltage output / PE 500 V DC (routine test)
Protection class I
Degree of protection IP20
MTBF (IEC 61709, SN 29500) > 1134000 h (25°C)
> 635000 h (40°C)
Mounting position horizontal DIN rail NS 35, EN 60715
Assembly instructions
alignable: P
N
≥50%, 5mm horizontally, 15mm next to active
components, 50mm vertically
alignable: P
N
<50%, 0mm horizontally, 40mm vertically top, 20 mm
vertically bottom
Connection data, input
Connection method Pluggable screw connection
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 2.5 mm²
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 2.5 mm²