Datasheet

https://www.phoenixcontact.com/us/produkte/2688093
Nov 14, 20134/9
Special function module-AXL CNT 2/INC 2-2688093
Technical data
Encoder data
Signal voltage level
Differential signal (signal – inverted signal)±0.5V, minimum;
±0.6V, maximum
Common mode voltage range signal - ground
-10 V ... 13.2 V
Input frequency
max. 300 kHz /150 kHz (depending on the input voltage)
Name
Asymmetrical incremental encoders
Encoder types that can be connected
max. 2 (A, B, (Z))
Type of connection of signals
Push-in technology
Signal voltage level
Low ≤ 2.5 V, high ≥ 3.5 V (up to 27 V, maximum)
Input frequency
max. 300 kHz /150 kHz (depending on the input voltage)
Digital inputs
Input name
Digital inputs
Description of the input
EN 61131-2, type 3
Connection method
Push-in technology
Connection method
1-wire (optionally 2, 3-wire)
Number of inputs
8 (CNT: G1, G2, Dir1, Dir2; INC: Ref1, Ref2, L1, L2)
Input voltage range "0" signal
-3 V DC ... 5 V DC
Input voltage range "1" signal
11 V DC ... 30 V DC
Nominal input current at U
IN
2.5 mA (per channel)
Digital outputs
Output name
Digital outputs
Connection method
Push-in technology
Connection method
1-wire
Number of outputs
2 (Out1, Out2)
Protective circuit
Short-circuit protection, overload protection of the outputs
Output voltage
24 V DC
Nominal output voltage
24 V DC
Maximum output current per channel
500 mA
Nominal load, inductive
max. 12 VA (1.2 H; 48 Ω; with nominal voltage)
Nominal load, lamp
max. 12 W (at nominal voltage)
Nominal load, ohmic
max. 12 W (48 Ω; with nominal voltage)
classifications
eCl@ss
eCl@ss 4.0
27240409
eCl@ss 4.1
27240409
eCl@ss 5.0
27242205
eCl@ss 5.1
27242605
eCl@ss 6.0
27242605
eCl@ss 7.0
27242605
eCl@ss 8.0
27242605