Instructions
Table Of Contents
- 1 Description
- 2 Table of contents
- 3 Ordering data
- 4 Technical data
- Dimensions (nominal sizes in mm)
- General data
- Connection data
- Interface PROFINET
- PROFINET
- Supply: Module electronics, sensors and actuators (US)
- Supply: Actuators (UA) for additional devices
- Digital inputs
- Digital outputs
- Electrical isolation/isolation of the voltage areas
- Test section
- Mechanical tests
- Conformance with EMC Directive 2014/30/EU
- Approvals
- 5 Internal circuit diagram
- 6 Pin assignment
- 7 Connection example
- 8 Connection notes
- 9 Factory reset via rotary encoding switches
- 10 Local status and diagnostic indicators
- 11 PROFINET IO Device
- 12 Startup
- 13 WBM - Web-based management
- 14 SNMP - Simple Network Management Protocol
- 15 Device description file (GSDML)
1Description
Axioline E PROFINET device, metal housing,
16freely configurable inputs or outputs,
24VDC, M12 fast connection technology
AXL E PN DIO16 M12 6M
© PHOENIX CONTACT
Data sheet
The Axioline E device is designed for use within a
PROFINET network.
It is used to acquire and output digital signals.
The device is designed for use in systems manufacturing.
It is suitable for use without a control cabinet under harsh
industrial conditions.
The Axioline E device can be used on tool platforms, directly
on welding robots or in conveying technology, for example.
PROFINET features
– Connection to PROFINET network
using M12 connectors (D-coded)
– Transmission speed 100 Mbps
– 2 Ethernet ports (with integrated switch)
– PROFINET RT (RTC 1)
supported with minimum cycle time of 1 ms
– Supported protocols: SNMP, LLDP, MRP, DCP
–PROFINET features:
FSU, shared device, MRP client, I&M functions 0 - 4
– Specification: mapping in accordance with
PROFINET specification v2.2
– Mapping as PROFINET IO device
(conformance class B)
– Device description using GSDML file
–Firmware can be updated
– Integrated web server for web-based management
AxiolineE features
– Connection of digital sensors and actuators
to M12 connectors (A-coded)
– Diagnostic and status indicators
– Short-circuit and overload protection
of the sensor supply
– IP65/67 degree of protection
This data sheet is only valid in association with the corresponding user manual.
Make sure you use the latest documentation.
It can be downloaded via the product at phoenixcontact.net/products
.
For the latest device description files, visit phoenixcontact.net/products
. If several versions of the device
description file are available, make sure that you are working with the file version that corresponds to the
firmware/hardware version used.
Abbreviations used:
– FSU: Fast startup
– MRP: Media Redundancy Protocol
– I&M: Identification and maintenance
8443_en_11
2020-01-10