Instructions
Table Of Contents
- 1 Description
- 2 Table of contents
- 3 Ordering data
- 4 Technical data
- Dimensions (nominal sizes in mm)
- General data
- Connection data
- Interface PROFINET
- PROFINET
- Supply: Module electronics, sensors and actuators (US)
- Supply: Actuators (UA) for additional devices
- Digital inputs
- Digital outputs
- Electrical isolation/isolation of the voltage areas
- Test section
- Mechanical tests
- Conformance with EMC Directive 2014/30/EU
- Approvals
- 5 Internal circuit diagram
- 6 Pin assignment
- 7 Connection example
- 8 Connection notes
- 9 Factory reset via rotary encoding switches
- 10 Local status and diagnostic indicators
- 11 PROFINET IO Device
- 12 Startup
- 13 WBM - Web-based management
- 14 SNMP - Simple Network Management Protocol
- 15 Device description file (GSDML)
AXL E PN DIO16 M12 6M
8443_en_11 PHOENIX CONTACT 14 / 21
10.2 Input and output indicators
Figure 10 Input and output indicators
DIO1 ... DIO 16
Designation Color Meaning State Description
00 ... 07,
10 ... 17
Yellow Status of the inputs and outputs
when used as an input
On Input is set.
Off Input is not set.
00 ... 07,
10 ... 17
Yellow/red Status of the inputs and outputs
when used as an output
Yellow on Output is set.
Red on Output is short circuited or overloaded.
Off Output is not set.
The numbering of the LEDs is as follows: the first number specifies the byte, the second number specifies the
bit.