Instructions

AXL E PN DIO16 M12 6M
8443_en_11 PHOENIX CONTACT 20 / 21
12 Startup
12.1 Delivery state/default settings
By default upon delivery, the following functions and
features are available:
PROFINET
Firmware update
System identification
Web-based Management (WBM)
12.2 Starting the firmware
Once you have connected the power, the firmware is
started.
After completion of the firmware boot process, the RDY LED
lights up green.
After completion of the firmware boot process, the BF LED
either lights up or flashes.
12.3 Firmware update
In order to update the firmware of the device, the device
must be provided with a firmware container via a TFTP
server or it must be loaded onto the device via FTP. Any FTP
client or TFTP server can be used for this. The update must
always be initiated by the web-based management. When
carrying out the firmware update, the RDY LED flashes
yellow.
12.4 Restoring the default settings
The default settings can be restored via rotary encoding
switches or WBM.
To do this, go to:
Administration web page > default settings and follow the
instructions.
PROFINET name: No name assigned
IP parameters: 0.0.0.0
Subnet mask: 0.0.0.0
Default Gateway: 0.0.0.0
Device designation: AXL E PN DIO16 M12 6M
Vendor ID: 00B0
hex
Device ID: 0104
hex
Firmware update on next
restart: deactivated
TFTP server IP address: 192.168.210.211
Firmware file name: FIRMWARE.NXF
Device name: No name assigned
Description: No description assigned
Device location: No location assigned
Contact: No contact assigned
User name: admin
Password: private