Datasheet
https://www.phoenixcontact.com/gb/products/2702534
02/13/2018Page3/6
Wireless module-FL WLAN 1100-2702534
Technical data
Ethernet interface
Transmission length 100 m (per segment)
Power supply for module electronics
Connection method Push-in spring connection
Designation 1966101 FMC 1,5/ 3-STF-3,5
Number of positions 3
Cross section range AWG 24 ... 16 (Use copper wires rated 75° C (UL))
Note on the connection method Recommended conductor cross section: 0.75 mm²
Recommended ferrule: connection length 10 mm
Recommended crimping pliers: trapezoidal or square
Supply voltage 24 V DC (SELV)
Supply voltage range 18 V DC ... 32 V DC (PELV/SELV)
Supply current typ. 120 mA (at 24 V DC)
Current consumption max. 250 mA (at 18 V DC)
Connection data
Designation 1966101 FMC 1,5/ 3-STF-3,5
Connection method Push-in spring connection
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 1.5 mm²
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 1.5 mm²
Conductor cross section AWG min. 24
Conductor cross section AWG max. 16
Stripping length 10 mm
General
Mounting type Single-hole mounting
Net weight 370.2 g
Degree of pollution 2
Note Degree of protection when installed
Wireless licences Belgium
Bulgaria
Denmark
Germany
Estonia
Finland
France
Greece
Great Britain
Ireland
Italy