Datasheet
https://www.phoenixcontact.com/us/produkte/2708054
Nov 13, 20131/12
FO converters-PSI-MOS-DNET CAN/FO 660/BM-2708054
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in
the user's documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
FO converter with integrated optical diagnosis, for DeviceNet™, CAN, CANopen
®
to 800 kbps, basic
module, interfaces: 1 x CAN, 1 x alarm, 1 x FO (FSMA), 660 nm, for polymer/HCS fiber cable
Product Features
Data rates of up to 800 kbps, set via DIP switches
Approved for use in zone 2
Intrinsically safe fiber optic interface (Ex op is) for direct connection to devices in zone 1
Integrated optical diagnostics for continuous monitoring of fiber optic paths
High-quality electrical isolation between all interfaces (DeviceNet // fiber optic port // power supply // backplane)
Integrated bus termination resistor can be connected internally
Integrated backplane for routing through the supply voltage and data signals
Connections can be plugged in using a COMBICON screw terminal block
Floating switch contact in the basic module for leading alarm generation in relation to critical fiber optic paths
Key commercial data
package_quantity
1
GTIN
4017918943226
Technical data
Note:
Utilization restriction
EMC: class A product, see manufacturer's declaration in the
download area
Dimensions
Width
22.5 mm
Height
99 mm
Depth
114.5 mm
Ambient conditions
Ambient temperature (operation)
-20 °C ... 60 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Permissible humidity (operation)
30 % ... 95 % (no condensation)
Altitude
5000 m (For restrictions see manufacturer's declaration)
Degree of protection
IP20