Datasheet

https://www.phoenixcontact.com/us/produkte/2708119
Nov 13, 20131/4
D-SUB bus connector-SUBCON-PLUS-CAN/PG-2708119
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in
the user's documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
Similar figure
D-SUB connector, 9-pos. socket, cable entry < 35°, bus system: CAN, CANopen
®
, SafetyBUS p up
to 1 Mbps, with PG D-SUB socket for connecting a programming device, termination resistor can be
switched on via slide switch, pin assignment: 2, 3, 6, 7, 9; screw terminal blocks

Product Features
Separate terminal blocks for bus cables
Segment-by-segment startup
High level of EMC
Assembly under field conditions
Flexibility in terms of cable entry selection
High transmission speed
Suitable for bus cables according to CiA Draft Recommendation 303-1 with an outside diameter of 8 mm
Termination resistor can be connected
 
Key commercial data
package_quantity
1
GTIN
4046356041331
Technical data
Dimensions
Max. cable diameter
8.4 mm
Min. cable diameter
7.6 mm
Width
16.6 mm
Height
39.4 mm
Length
58 mm
Ambient conditions
Ambient temperature (operation)
-20 °C ... 75 °C
Ambient temperature (storage/transport)
-25 °C ... 80 °C
Altitude
5000 m (For restrictions see manufacturer's declaration)
General
Nominal voltage U
N
50 V
Nominal current I
N
100 mA
Bus system
CAN, CANopen, SafetyBus-P