Datasheet
https://www.phoenixcontact.com/us/produkte/2708290
Nov 14, 20131/17
FO converters-PSI-MOS-PROFIB/FO 660 E-2708290
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in
the user's documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
FO converter with integrated optical diagnostics, alarm contact, for PROFIBUS up to 12 Mbps,
termination device with an FO interface (FSMA), 660 nm, for polymer/HCS fiber cable
Product Features
Can be combined with the PSI copper repeater in a modular way using DIN rail connectors
Supply voltage and data signals routed through via DIN rail connectors
Connections can be plugged in using a COMBICON screw terminal block
Automatic data rate detection or fixed data rate setting via DIP switches
Redundant power supply possible by means of optional system power supply unit
High-quality electrical isolation between all interfaces (PROFIBUS // fiber optic ports // power supply // DIN rail connector)
Approved for use in zone 2
Intrinsically safe fiber optic interface (Ex op is) for direct connection to devices in zone 1
Floating switch contact for leading alarm generation in relation to critical fiber optic paths
Integrated optical diagnostics for continuous monitoring of fiber optic paths
Suitable for all data rates up to 12 Mbps
Bit retiming for any cascading depth
Key commercial data
package_quantity
1
GTIN
4017918973995
Technical data
Note:
Utilization restriction
EMC: class A product, see manufacturer's declaration in the
download area
Dimensions
Width
35 mm
Height
99 mm
Depth
106 mm
Ambient conditions
Ambient temperature (operation)
-20 °C ... 60 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C