Datasheet
https://www.phoenixcontact.com/us/produkte/2708339
Nov 14, 20131/17
FO converters-PSI-MOS-RS485W2/FO 850 E-2708339
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in
the user's documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
FO converter with integrated optical diagnosis, alarm contact, for RS-485 2-wire bus systems
(SUCONET K, Modbus ...) up to 500 kbps, NRZ coding, terminal equipment with an FO interface
(BFOC), 850 nm, for HCS/fiber glass cable
Product Features
Can be combined with the PSI copper repeater in a modular way using DIN rail connectors
Connections can be plugged in using a COMBICON screw terminal block
Supply voltage and data signals routed through via DIN rail connectors
Automatic data rate detection or fixed data rate setting via DIP switches
High-quality electrical isolation between all interfaces (RS-485 // fiber optic ports // power supply // DIN rail connector)
Redundant power supply possible by means of optional system power supply unit
Approved for use in zone 2
Intrinsically safe fiber optic interface (Ex op is) for direct connection to devices in zone 1
Integrated optical diagnostics for continuous monitoring of fiber optic paths
Floating switch contact for leading alarm generation in relation to critical fiber optic paths
Suitable for data rates up to 500 kbps
Key commercial data
package_quantity
1
GTIN
4017918974039
Technical data
Note:
Utilization restriction
EMC: class A product, see manufacturer's declaration in the
download area
Dimensions
Width
35 mm
Height
99 mm
Depth
105 mm
Ambient conditions
Ambient temperature (operation)
-20 °C ... 60 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Permissible humidity (operation)
30 % ... 95 % (no condensation)