Datasheet
https://www.phoenixcontact.com/us/produkte/2708342
Nov 13, 20131/15
FO converters-PSI-MOS-RS422/FO 660 E-2708342
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in
the user's documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
FO converter with integrated optical diagnosis, alarm contact, for RS-422/RS-485 4-wire/ INTERBUS
to 2 Mbps, terminal equipment with an FO interface (FSMA), 660 nm, for polymer/HCS fiber cable
Product Features
Connections can be plugged in using a COMBICON screw terminal block
Supply voltage routed through via DIN rail connectors
Redundant power supply possible by means of optional system power supply unit
High-quality electrical isolation between all interfaces (INTERBUS // fiber optic ports // power supply // DIN rail connector)
Approved for use in zone 2
Floating switch contact for leading alarm generation in relation to critical fiber optic paths
Integrated optical diagnostics for continuous monitoring of fiber optic paths
Intrinsically safe fiber optic interface (Ex op is) for direct connection to devices in zone 1
Automatic data rate detection for all data rates up to 2 Mbps
Key commercial data
package_quantity
1
GTIN
4017918974046
Technical data
Note:
Utilization restriction
EMC: class A product, see manufacturer's declaration in the
download area
Dimensions
Width
35 mm
Height
99 mm
Depth
103 mm
Ambient conditions
Ambient temperature (operation)
-20 °C ... 60 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Permissible humidity (operation)
30 % ... 95 % (no condensation)
Altitude
5000 m (For restrictions see manufacturer's declaration)
Degree of protection
IP20