Datasheet

https://www.phoenixcontact.com/us/produkte/2708355
Nov 13, 20131/14
FO converters-PSI-MOS-RS422/FO 850 E-2708355
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in
the user's documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
FO converter with integrated optical diagnosis, alarm contact, for RS-422/RS-485 4-wire/ INTERBUS
to 2 Mbps, terminal equipment with an FO interface (BFOC), 850 nm, for HCS/fiber glass cable

Product Features
Supply voltage routed through via DIN rail connectors
Connections can be plugged in using a COMBICON screw terminal block
High-quality electrical isolation between all interfaces (INTERBUS // fiber optic ports // power supply // DIN rail connector)
Redundant power supply possible by means of optional system power supply unit
Approved for use in zone 2
Intrinsically safe fiber optic interface (Ex op is) for direct connection to devices in zone 1
Integrated optical diagnostics for continuous monitoring of fiber optic paths
Floating switch contact for leading alarm generation in relation to critical fiber optic paths
Automatic data rate detection for all data rates up to 2 Mbps
  
Key commercial data
package_quantity
1
GTIN
4017918974053
Technical data
Note:
Utilization restriction
EMC: class A product, see manufacturer's declaration in the
download area
Dimensions
Width
35 mm
Height
99 mm
Depth
103 mm
Ambient conditions
Ambient temperature (operation)
-20 °C ... 60 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Permissible humidity (operation)
30 % ... 95 % (no condensation)
Altitude
5000 m (For restrictions see manufacturer's declaration)
Degree of protection
IP20