Datasheet

ManualsBrandsPHOENIX CONTACT ManualsPhoenix ContactSensor/actuator terminal block DIKD 1,5-PV BK

https://www.phoenixcontact.com/hq/products/2715571

01/18/2017Page1/16

Sensor/actuator terminal block-DIKD 1,5-PV BK-2715571

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's

documentation. Our General Terms of Use for Downloads are valid

(http://phoenixcontact.com/download)

Sensor/actuator terminal block,With equipotential bonder, Connection type:Screw connection, Cross section:

0.2 mm²-4 mm², AWG:24-12, Width:6.2 mm, Color:black, Mounting type:NS 35/7,5,NS 35/15

The illustration shows version DIKD

1,5-PV in gray

Why buy this product

The potential distributor terminal block is available with gray, blue or black insulating housing for clear potential identification

Bridgeable upper level for potential distribution over more than 6 terminal points

Space-saving potential distributor terminal block

Key Commercial Data

Packing unit 50 STK

GTIN

GTIN 4017918061463

Custom tariff number 85369010

Technical data

General

Number of levels 3

Number of connections 6

Nominal cross section 2.5 mm²

Color black

Insulating material PA

Flammability rating according to UL 94 V2

Rated surge voltage 4 kV

Degree of pollution 3

Overvoltage category III

Insulating material group I

Connection in acc. with standard IEC 60947-7-1

Summary of content (16 pages)

PAGE 1
https://www.phoenixcontact.com/hq/products/2715571 Sensor/actuator terminal block - DIKD 1,5-PV BK - 2715571 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Sensor/actuator terminal block, With equipotential bonder, Connection type: Screw connection, Cross section: 0.2 mm² - 4 mm², AWG: 24 - 12, Width: 6.
PAGE 2
https://www.phoenixcontact.com/hq/products/2715571 Sensor/actuator terminal block - DIKD 1,5-PV BK - 2715571 Technical data General Nominal current IN 24 A Maximum load current 32 A (In case of a 4 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.) Nominal voltage UN 250 V Open side panel No Dimensions Width 6.2 mm Length 72.5 mm Height NS 35/7,5 54.
PAGE 3
https://www.phoenixcontact.com/hq/products/2715571 Sensor/actuator terminal block - DIKD 1,5-PV BK - 2715571 Technical data Connection data Tightening torque, min 0.5 Nm Tightening torque max 0.6 Nm Standards and Regulations Connection in acc.
PAGE 4
https://www.phoenixcontact.com/hq/products/2715571 Sensor/actuator terminal block - DIKD 1,5-PV BK - 2715571 Approvals UL Recognized  http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm B C D mm²/AWG/kcmil 30-14 30-14 30-14 Nominal current IN 15 A 15 A 10 A Nominal voltage UN 300 V 150 V 300 V cUL Recognized  http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.
PAGE 5
https://www.phoenixcontact.com/hq/products/2715571 Sensor/actuator terminal block - DIKD 1,5-PV BK - 2715571 Accessories DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length: 2000 mm DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, material: Steel, unperforated, height 7.
PAGE 6
https://www.phoenixcontact.com/hq/products/2715571 Sensor/actuator terminal block - DIKD 1,5-PV BK - 2715571 Accessories DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail, material: Galvanized, perforated, height 7.5 mm, width 35 mm, length: 2 m DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, material: Galvanized, unperforated, height 7.
PAGE 7
https://www.phoenixcontact.
PAGE 8
https://www.phoenixcontact.com/hq/products/2715571 Sensor/actuator terminal block - DIKD 1,5-PV BK - 2715571 Accessories DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586 DIN rail, material: Galvanized, unperforated, height 15 mm, width 35 mm, length: 2 m DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, material: Copper, unperforated, 1.
PAGE 9
https://www.phoenixcontact.com/hq/products/2715571 Sensor/actuator terminal block - DIKD 1,5-PV BK - 2715571 Accessories End clamp - CLIPFIX 35-5 - 3022276 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray End clamp - E/NS 35 N - 0800886 End clamp, width: 9.5 mm, color: gray End clamp - E/UK - 1201442 End clamp, Width: 9.5 mm, Height: 35.3 mm, Length: 50.
PAGE 10
https://www.phoenixcontact.com/hq/products/2715571 Sensor/actuator terminal block - DIKD 1,5-PV BK - 2715571 Accessories Insertion bridge - EB 80- DIK BU - 2715940 Insertion bridge, Pitch: 6.2 mm, Number of positions: 80, Color: blue Insertion bridge - EB 10- DIK RD - 2716774 Insertion bridge, Pitch: 6.15 mm, Number of positions: 10, Color: red Insertion bridge - EB 10- DIK BU - 2716680 Insertion bridge, Pitch: 6.
PAGE 11
https://www.phoenixcontact.com/hq/products/2715571 Sensor/actuator terminal block - DIKD 1,5-PV BK - 2715571 Accessories Insertion bridge - EB 5- DIK BU - 2716677 Insertion bridge, Pitch: 6.15 mm, Number of positions: 5, Color: blue Insertion bridge - EB 4- DIK BU - 2716664 Insertion bridge, Pitch: 6.15 mm, Number of positions: 4, Color: blue Insertion bridge - EB 3- DIK BU - 2716651 Insertion bridge, Pitch: 6.
PAGE 12
https://www.phoenixcontact.com/hq/products/2715571 Sensor/actuator terminal block - DIKD 1,5-PV BK - 2715571 Accessories Insertion bridge - EB 4- DIK RD - 2716758 Insertion bridge, Pitch: 6.15 mm, Number of positions: 4, Color: red Insertion bridge - EB 3- DIK RD - 2716745 Insertion bridge, Pitch: 6.15 mm, Number of positions: 3, Color: red Insertion bridge - EB 2- DIK RD - 2716693 Insertion bridge, Pitch: 6.
PAGE 13
https://www.phoenixcontact.com/hq/products/2715571 Sensor/actuator terminal block - DIKD 1,5-PV BK - 2715571 Accessories Zack marker strip - ZB 6,LGS:FORTL.ZAHLEN - 1051016 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed horizontally: Consecutive numbers 1 - 10, 11 - 20, etc. up to 491 - 500, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm Zack marker strip - ZB 6,QR:FORTL.
PAGE 14
https://www.phoenixcontact.com/hq/products/2715571 Sensor/actuator terminal block - DIKD 1,5-PV BK - 2715571 Accessories Marker for terminal blocks - UC-TM 6 CUS - 0824589 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 5.6 x 10.
PAGE 15
https://www.phoenixcontact.
PAGE 16
https://www.phoenixcontact.com/hq/products/2715571 Sensor/actuator terminal block - DIKD 1,5-PV BK - 2715571 Accessories Marker for terminal blocks - UC-TM 6 - 0818085 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, CMSP1-PLOTTER, PLOTMARK, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 5.6 x 10.