Datasheet

https://www.phoenixcontact.com/us/produkte/2717074
Nov 10, 20131/12
Sensor/actuator terminal block-DOK 1,5-LA 24GN/O-M-2717074
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in
the user's documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
The illustration shows version
DOK 1,5-LA 24RD/O-M
Sensor/actuator terminal block, Cross section: 0.2 mm²-4 mm², AWG:24-12, Connection
type:Screw connection, Width:6.2 mm, Color:gray, Mounting type:NS 35/7,5,NS 35/15

Product Features
Same shape as DIK ... three-level initiator terminal blocks
Terminal blocks with red and green LEDs are available for optical signaling of the initiator and actuator wiring
The forks of the insertion bridge can be easily loosened for bridging between non-adjacent terminal blocks
Unlike the DIK terminal blocks, the lower level of these output terminal blocks makes direct contact with the DIN rail and as a PE
connection are marked yellow-green
Alternate wiring of an actuator followed by an initiator is easy
Because the spine of the insertion bridge can be snapped into place with the terminal block housing, all the terminal points can be
wired freely and the bridge can be securely positioned
The upper level contains the feed-through connections for the signal cable which can be labeled
The middle level supplies the connected actuators with power
Key commercial data
package_quantity
50
GTIN
4017918062095
Technical data
General
Number of levels
3
Number of connections
4
Color
gray
Insulating material
PA
Inflammability class according to UL 94
V2
General
Rated surge voltage
4 kV
Pollution degree
3
Surge voltage category
III
Insulating material group
I
Connection in acc. with standard
IEC 60947-7-1
Nominal current I
N
24 A