Datasheet
https://www.phoenixcontact.com/us/produkte/2742751
Nov 14, 20131/4
Coupling module-IBS-PB CT 24 IO GT-T-2742751
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in
the user's documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
I/O coupling module (gateway) for an INTERBUS system and a PROFIBUS DP system, 24 V DC,
protection type IP20
Product Description
CT coupling modules connect two fieldbus systems at the input/output level. With the above module type, it is possible to couple an
INTERBUS system to a PROFIBUS system. In their function, the gateways correspond to two normal I/O modules, the inputs and
outputs of which are connected crosswise.In this way, bi-directional data transfer can take place between any two control systems. The
volume of data can be up to ten words (160 bits) per cycle.The data width can be configured between one byte and ten words by means
of a rotary switch (byte configuration is only possible in Generation 4 controller boards). The selected data word (or byte) is shown on a
7-segment display.The modules are installed directly in the remote bus. The bus is connected at the INTERBUS-PROFIBUS gateway
IBS-PB 24 IO GT-T via 9-pos. D-SUB connectors.The modules are equipped with electrically isolated bus lines as well as a redundant
supply of the 24 V power. 16 status LEDs assigned to each bus line are used to display the signal states. A button located on the
module permits the current output word or byte of the specific remote bus to be displayed. In this case, the output information for one
bus is the input information of the other. If a bus system fails, an error message is generated in the other bus system (I/O error message
or static diagnostics)
Product Features
Electrical isolation
Redundant power supply
Diagnostic and status indicators
Transmission of process data
DIN rail mounting
Key commercial data
package_quantity
1
GTIN
4017918890360
Technical data
Dimensions
Width
204 mm
Height
77 mm
Depth
37 mm
Ambient conditions
Degree of protection
IP20
Ambient temperature (operation)
-25 °C ... 55 °C
Ambient temperature (storage/transport)
-25 °C ... 85 °C
Interfaces
Interface
INTERBUS remote bus (incoming/outgoing)