Datasheet

https://www.phoenixcontact.com/us/produkte/2744694
Nov 14, 20131/4
D-SUB bus connector-SUBCON-PLUS-CAN-2744694
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in
the user's documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
D-SUB connector, 9-pos. female connector, two cable entries < 35° to one terminal block row, bus
system: CAN, CANopen
®
, SafetyBUS p up to 1 Mbps, termination resistor can be switched on via
slide switch, pin assignment: 2, 3, 7; screw connection terminal blocks

Product Features
Separate terminal blocks for bus cables
High transmission speed
Segment-by-segment startup
Flexibility in terms of cable entry selection
Assembly under field conditions
High level of EMC
Suitable for bus cables according to CiA Draft Recommendation 303-1 with an outside diameter of 8 mm
Termination resistor can be connected
 
Key commercial data
package_quantity
1
GTIN
4017918821760
Technical data
Dimensions
Max. cable diameter
10 mm
Min. cable diameter
6 mm
Ambient conditions
Ambient temperature (operation)
-20 °C ... 75 °C
Ambient temperature (storage/transport)
-25 °C ... 80 °C
Altitude
5000 m (For restrictions see manufacturer's declaration)
General
Nominal voltage U
N
50 V
Nominal current I
N
100 mA
Bus system
CAN, CANopen, SafetyBus-P
Signal
CAN
Signal
CANopen
®
Signal
SafetyBUS p