Datasheet

https://www.phoenixcontact.com/us/produkte/2775207
Nov 10, 20131/13
Feed-through terminal block-UDK 4-DUR-2775207
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in
the user's documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
The illustration shows version
UDK 4-DUR 249
Feed-through terminal block, Connection type:Screw connection, Cross section: 0.2 mm²-6 mm²,
AWG:24-10, Nominal current:32 A, Nominal voltage:630 V, Length:63.5 mm, Width:6.2 mm,
Color:gray, Assembly:NS 35/7,5, NS 35/15, NS 32

Product Features
The four-conductor connection enables user-friendly wiring
A voltage signal pick-off can be implemented in the measuring line using this terminal block, enabling the signal to be used as an
analog signal for process computers
The lower level is assigned to the measuring line while the upper level is used for voltage pick-off via the 249 Ω resistor
The constant circuits common in process automation transmit the measured values as a load-independent current of 0-20mA
Key commercial data
package_quantity
50
GTIN
4017918068509
Technical data
General
Number of levels
1
Number of connections
4
Color
gray
Insulating material
PA
Inflammability class according to UL 94
V2
General
Maximum load current
(the current is determined by the component used)
Rated surge voltage
8 kV
Pollution degree
3
Surge voltage category
III
Insulating material group
I
Nominal current I
N
32 A (the current is determined by the component used)
Nominal voltage U
N
630 V
Open side panel
ja
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection
guaranteed
Finger protection
guaranteed