Datasheet

https://www.phoenixcontact.com/us/produkte/2807609
Nov 13, 20132/10
Type 2 surge protection plug-VAL-MS 500 ST-2807609
Technical data
General
Number of positions
1
Arrester can be tested with CHECKMASTER from software
version:
From SW rev. 1.10
Message: Surge protection fault
Optical
Direction of action
1L-N/PE
Protective circuit
IEC test classification
II
IEC test classification
T2
EN type
T2
Nominal voltage U
N
500 V AC
Maximum continuous operating voltage U
C
600 V AC
U
T
(TOV-proof)
690 V AC (5 s)
Nominal frequency f
N
50 Hz (60 Hz)
Residual current I
PE
≤ 0.3 mA
Standby power consumption P
C
≤ 180 mVA
Max. discharge current I
max
(8/20) µs
30 kA
Nominal discharge current I
n
(8/20) µs
15 kA
Impulse discharge current (10/350) µs, peak value l
imp
3 kA
Voltage protection level U
p
≤ 2.7 kV
Residual voltage
≤ 2.7 kV
Residual voltage
≤ 2.5 kV (at 10 kA)
Residual voltage
≤ 2.3 kV (at 5 kA)
Residual voltage
≤ 2.2 kV (at 3 kA)
Response time
≤ 25 ns
Max. required backup fuse with branch wiring
125 A (gG)
Short-circuit resistance I
P
with max. backup fuse (effective)
25 kA
Capacity
1.2 nF ±35 %
Standards and Regulations
Standards/regulations
IEC 61643-1 2005
Standards/regulations
EN 61643-11/A11 2007
Standards/regulations
UL 1449 ed. 2
Standards/regulations
IEEE C62.1 / C62.34 / C62.45
classifications
eCl@ss
eCl@ss 4.0
27140201
eCl@ss 4.1
27130801
eCl@ss 5.0
27130801
eCl@ss 5.1
27130801