Datasheet

https://www.phoenixcontact.com/us/produkte/2835574
Nov 13, 20131/5
Signal isolator-PI-EX-NAM/TO-2835574
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in
the user's documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
Ex-i binary input: NAMUR isolation amplifiers. For operating proximity sensors and switches in
Ex areas. The binary signals are transmitted to a safe area. Transistor output (active), line fault
detection. Electrical isolation.

 
Key commercial data
package_quantity
1
GTIN
4017918894863
Technical data
Note:
Utilization restriction
EMC: class A product, see manufacturer's declaration in the
download area
Dimensions
Width
12.4 mm
Height
145 mm
Depth
147 mm
Ambient conditions
Ambient temperature (operation)
-20 °C ... 60 °C (see data sheet)
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Degree of protection
IP20
Input data
Non-load voltage
8.2 V DC ±10 %
Switching points (attenuated)
< 1.2 mA (blocking)
Switching points (unattenuated)
> 2.1 mA (conductive)
Output data
Switching output
Transistor output, active, pnp
Configurable/programmable
Can be inverted via slide switch
Switching current
100 mA (short-circuit resistant)
Power supply
Supply voltage range
20 V DC ... 30 V DC