Datasheet
https://www.phoenixcontact.com/us/produkte/2861632
Nov 14, 20131/7
Inline function terminal-IB IL PWM/2-PAC-2861632
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in
the user's documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
Inline function terminal for pulse width and frequency modulation or activation of impulse-driven
motor control parts with pulse/direction interface, two outputs for 5 V or 24 V
Product Description
Inline terminal IB IL PWM/2 offers the capability of pulse width modulation (PWM) of the output signals. It features two independently
operating channels. Each of the two output signals is available as a 5 V and as a 24 V signal.Depending on the operating mode, either
the high-phase of the period, the period duration, or the frequency can be set. The following four operating modes are supported:- Pulse
width modulation- Frequency range- Single shot and- Pulse/direction signal outputs
Product Features
Maximum frequency of 50 kHz
Pulse/direction signal output without integrated ramp function to control step motor power sections
2 independent channels
Output of 5 V or 24 V signals
Single pulse output (pulse length of 10 μs to 25.5 s can be set)
Pulse width modulation (period length can be set in increments from 100 µs to 10 s, duty factor in 0.39% increments)
Frequency output (frequency can be set between 0 and 50 kHz)
Key commercial data
package_quantity
1
GTIN
4017918948313
Technical data
Note:
Utilization restriction
EMC: class A product, see manufacturer's declaration in the
download area
Dimensions
Height
136.8 mm
Depth
71.5 mm
Width
24.4 mm
Ambient conditions
Degree of protection
IP20
General
Weight
130 g
Number of connectors
2