Datasheet
https://www.phoenixcontact.com/us/produkte/2861674
Nov 14, 20131/7
Inline terminal-IB IL 24 PWR IN/R-PAC-2861674
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in
the user's documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
Inline power terminal or boost terminal, complete with accessories (plug and labeling field), 24 V DC,
without fuse
Product Description
The terminal is designed for use within an Inline station. When the maximum current carrying capacity of the voltage jumper U
L
has
been reached, this terminal can be used to supply the logics voltage again. A 24 V DC voltage (U 24 V ) is applied to the terminal.
This provides the logics voltage (U
L
) and the supply voltage for the analog terminals (U
ANA
). The terminal also allows the 24 V DC main
voltage (U
M
) and the 24 V DC segment voltage (U
S
) to be supplied.Features– All 24 V DC voltages necessary for the low-level signal
level of an Inline station can be supplied– Diagnostics displays
Product Features
Supply of all 24 V voltages required for the low-level signal of an Inline station
Diagnostic and status indicators
From hardware version 01, approved for use in potentially explosive areas of zone 2
Key commercial data
package_quantity
1
GTIN
4017918894511
Technical data
Note:
Utilization restriction
EMC: class A product, see manufacturer's declaration in the
download area
Dimensions
Width
48.8 mm
Height
119.8 mm
Depth
71.5 mm
Interfaces
Connection method
Inline data jumper
Interface
Inline local bus
Power supply
I/O voltage
24 V DC
I/O voltage range
19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Max. current consumption
8 A