Datasheet

https://www.phoenixcontact.com/gb/products/2862246
02/13/2018Page1/8
Bus coupler-IL PB BK DP/V1-PAC-2862246
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Inline, Bus coupler, PROFIBUS DP, D-SUB-9 female connector, transmission speed in the local bus:500
kbps, degree of protection:IP20, including Inline connector and labeling field
Product Description
The bus coupler is intended for use within a PROFIBUS network and represents the link to the Inline I/O system.
Up to 63 Inline devices can be connected to the bus coupler.
The bus coupler supports a maximum of 16PCP devices.
A corresponding GSD file is available for integrating the Inline station into the programming system.
This file can be downloaded via the product at phoenixcontact.net/products.
The bus coupler does not support PROFIsafe modules. Use the IL PB BK DI8 DO4/EF-PAC bus coupler for this.
This bus coupler does not support intrinsically safe Inline terminals or the corresponding power terminal and disconnect terminal block, i.e.,all
IBILEX... items. Use the IL PB BK DI8 DO4/EF-PAC bus coupler for this.
Why buy this product
PROFIBUS connection via 9-pos. D-SUB socket
PROFIBUS data transmission speed of 9.6 kbps to 12 Mbps
Electrical isolation between PROFIBUS interface and logic
DIP switch to set the PROFIBUS address
Supported PROFIBUS addresses from 0 to 126
DP/V1 for class 1 and class 2 masters
Key Commercial Data
Packing unit 1 STK
GTIN
GTIN 4017918907471
Weight per Piece (excluding packing) 240.000 g
Custom tariff number 85389091
Country of origin Germany
Technical data
Note

Summary of content (8 pages)