Datasheet

https://www.phoenixcontact.com/us/produkte/2865405
Nov 14, 20131/7
Output signal conditioner-MACX MCR-EX-SL-IDSI-I-2865405
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in
the user's documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
Ex-i output signal conditioner, HART Isolates and sends intrinsically safe 0/4-20 mA signals to a
load (I/P converters, control valves, displays) in Ex areas. Electrical 3-way isolation, wire break
recognition, SIL 2 in accordance with IEC 61508.

Product Features
Power supply possible via DIN rail connector
Up to SIL 2 according to EN 61508
Installation in zone 2, protection type "n" (EN 60079-15) permitted
Line fault detection (LFD)
3-way electrical isolation
0/4 ... 20 mA output, [Ex ia] IIC
Plug-in screw or spring-cage connection technology (Push-in technology), with integrated sockets for HART communicators
Bidirectional transmission of digital HART communication signals
0/4 ... 20 mA input
  
Key commercial data
package_quantity
1
GTIN
4046356160421
Technical data
Dimensions
Width
12.5 mm
Height
99 mm
Depth
114.5 mm
Ambient conditions
Ambient temperature (operation)
-20 °C ... 60 °C (Any mounting position)
Ambient temperature (storage/transport)
-40 °C ... 80 °C
Maximum altitude
≤ 2000 m
Permissible humidity (operation)
10 % ... 95 % (no condensation)
Degree of protection
IP20
Input data
Current input signal
0 mA ... 20 mA