Datasheet

https://www.phoenixcontact.com/us/produkte/2865764
Nov 14, 20131/7
Solenoid driver-MACX MCR-EX-SL-SD-21-40-LP-2865764
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in
the user's documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
Ex-i solenoid driver. For controlling Ex-i solenoid valves, alarm modules or LEDs installed in Ex
areas. Current limitation at 40 mA. For gases up to Group II C, loop-powered, electrical isolation, SIL
3.

Product Features
Mechanically compatible with the DIN rail connector
Various output characteristic curves compatible with standard solenoid valves
Loop-powered: the required power is supplied via the control signal on the input side.
Up to SIL 3 according to EN 61508
Installation in zone 2, protection type "n" (EN 60079-15) permitted
Output [Ex ia] IIC/[Ex ia] IIB
2-way electrical isolation
20
30 V DC input
  
Key commercial data
package_quantity
1
GTIN
4046356325233
Technical data
Dimensions
Width
12.5 mm
Height
99 mm
Depth
114.5 mm
Ambient conditions
Ambient temperature (operation)
-20 °C ... 60 °C (Any mounting position)
Ambient temperature (storage/transport)
-40 °C ... 80 °C
Maximum altitude
≤ 2000 m
Permissible humidity (operation)
10 % ... 95 % (no condensation)
Degree of protection
IP20
Output data
Output characteristic curve: Output resistor
287 Ω (Internal resistance R
i
)