Datasheet

https://www.phoenixcontact.com/us/produkte/2866514
Nov 9, 20131/5
Redundancy module-TRIO-
DIODE/12-24DC/2X10/1X20-2866514
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in
the user's documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
Redundancy module with function monitoring, 12-24 V DC, 2x 10 A, 1x 20 A
Product Description
TRIO DIODE is the DIN-rail mountable redundancy module from the TRIO POWER product range.Using the redundancy module, it is
possible for two power supply units of the same type connected in parallel on the output side to increase performance or for redundancy
to be 100% isolated from one another.Redundant systems are used in systems that place particularly high demands on operational
reliability. The connected power supply units must be large enough that the total current requirements of all loads can be met by one
power supply unit. The redundant structure of the power supply therefore ensures long-term, permanent system availability.In the event
of an internal device fault or failure of the mains power supply on the primary side, the other device automatically takes over the entire
power supply of the loads without interruption. The floating signal contact and LED immediately indicate the loss of redundancy. 
Product Features
Save energy
Permanent monitoring of redundancy
Consistent redundancy up to the load

Key commercial data
package_quantity
1
GTIN
4046356492034
Technical data
Dimensions
Width
32 mm
Height
130 mm
Depth
115 mm
Ambient conditions
Degree of protection
IP20
Ambient temperature (operation)
-25 °C ... 70 °C (> 55° C derating)
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, no condensation)
Input data
Nominal input voltage range
12 V DC ... 24 V DC