Data Sheet
https://www.phoenixcontact.com/us/products/2902005
May 3, 20171/11
Isolation amplifier-MINI MCR-2-NAM-2RO-PT-2902005
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in
the user's documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
Configurable NAMUR signal conditioner with plug-in connection technology for proximity sensors,
floating switch contacts, and switch contacts with resistance circuit. 2 transistor outputs. Configurable
via DIP switch. Push-in connection technology.
Article description
Configurable NAMUR 4-way signal conditioner with plug-in connection technology for operating proximity sensors according to EN
60947-5-6, floating switch contacts, and switch contacts with resistance circuit. Two transistor outputs are available on the output side.
The second output can be used either for duplicating signals or for signaling faults on the sensor line. You can configure the signal
conditioner via DIP switches. The device supports fault monitoring and NFC communication.
Your advantages
Floating contacts and contacts with resistance circuit can be connected
Power supply possible via the foot element (TBUS)
Highly compact isolation amplifier for electrical isolation, amplification, and duplication of proximity sensor signals
For proximity sensors according to IEC 60947-5-6 and EN 50227
Second output can be used as a duplicator or error signaling output
Error indication via diagnostic LED and analog signal
N/O contacts at output
Input and output signals can be configured via DIP switches
3-way isolation
Key commercial data
package_quantity
1
GTIN
4046356649513
Technical data
Note
Utilization restriction
EMC: class A product, see manufacturer's declaration in the
download area
Dimensions
Width
6.2 mm
Height
110.5 mm
Depth
120.5 mm
Ambient conditions