Data Sheet
https://www.phoenixcontact.com/us/products/2902031
May 3, 20171/12
Frequency transducer-MINI MCR-2-UI-FRO-2902031
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in
the user's documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
The figure shows the MINI
MCR-2-UI-FRO-PT version
Analog frequency transducer with limit value functionality and plug-in connection technology for
converting standard signals into frequency or PWM signals. Configurable via DIP switch or software.
Screw connection technology, standard configuration.
Article description
Configurable, freely adjustable analog frequency transducer with additional switching output, limit value functionality, and plug-in
connection technology for converting standard analog signals to frequency signals or to pulse width modulated signals (PWM signals).
Current signals between 0 mA ... 24 mA and voltage signals between 0 V ... 12 V can be processed on the input side. Frequency
signals between 0 ... 11 kHz and PWM signals between 0% ... 100% are possible on the output side. In addition, the output can also
be operated as a switching output, which means that two switching thresholds can be set independently of one another. The minimum
measuring span is 1 mA and 0.5 V. Full accuracy is maintained with a measuring span greater than 10 mA and 5 V. You can configure
the device using one of the free software solutions. Default settings can also be made directly on the device by simply using the DIP
switches (see configuration table). The measuring transducer supports fault monitoring and NFC communication.
Key commercial data
package_quantity
1
GTIN
4046356652032
Technical data
Note
Utilization restriction
EMC: class A product, see manufacturer's declaration in the
download area
Dimensions
Width
6.2 mm
Height
110.5 mm
Depth
120.5 mm
Ambient conditions
Ambient temperature (operation)
-40 °C ... 70 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Input data
Configurable/programmable
Yes
Voltage input signal
0 V ... 10 V (via DIP switch)