Datasheet
https://www.phoenixcontact.com/lt/products/2902040
04/05/2017Page1/11
Signal conditioner-MINI MCR-2-UI-UI-PT-2902040
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
3-way signal conditioner with plug-in connection technology and calibrated measuring range changeover, for
the electrical isolation of unipolar and bipolar analog signals. Input/output configurable via DIP switch. push-in
connection technology, standard configuration.
Product Description
The 3-way signal conditioner with plug-in connection technology and calibrated measuring range changeover can be configured using DIP switches
and is used for the electrical isolation, conversion, amplification, and filtering of unipolar and bipolar standard and normalized signals. On the input
side, the standard analog signals 0...20mA, 4...20mA, 0...10V, 0...5V, 1...5V or -10...10V, and signals2...10V, 0...20V, 4...20V,
0...24V, 0...30V, -5...5V, -20...20V, -24...24V, -30...30V and -20...20mA are available. On the output side, 0...20mA, 4...20mA,
0...10V, 0...5V, 1...5V, -10...10V and -5...5V are possible. There is no need for adjustment following a measuring range changeover. The
measuring transducer supports fault monitoring and NFC communication.
Key Commercial Data
Packing unit 1 STK
GTIN
GTIN 4046356652063
Weight per Piece (excluding packing) 97.500 g
Custom tariff number 85437090
Country of origin Germany
Technical data
Note
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download
area
Dimensions
Width 6.2 mm
Height 110.5 mm
Depth 120.5 mm
Ambient conditions
Ambient temperature (operation) -40 °C ... 70 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Degree of protection IP20
Input data
Number of inputs 1
Configurable/programmable Yes