Data Sheet

https://www.phoenixcontact.com/us/products/2902061
May 3, 20171/10
Loop-powered isolators-MINI MCR-2-UI-I-OLP-2902061
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in
the user's documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
The figure shows the MINI
MCR-2-UI-I-OLP-PT version
Output loop-powered 2-way isolator with plug-in connection technology for the electrical isolation of
unipolar and bipolar analog signals. Input configurable via DIP switch. Screw connection technology,
standard configuration.
Article description
Output loop-powered 2-way isolator with plug-in connection technology for the electrical isolation, conversion, and filtering of analog
signals. The output loop-powered isolator allows operation at an active analog input module. The device is supplied via the current loop
of the controller. On the input side, standard analog signals and non-standard analog signals can be connected, ranging from 2 mA or
50 mV up to 40 mA or 30 V. These are converted to 4 mA ... 20 mA signals. You can configure the input signals via DIP switches. The
measuring transducer supports NFC communication. 
   
Key commercial data
package_quantity
1
GTIN
4046356652100
Technical data
Note
Utilization restriction
EMC: class A product, see manufacturer's declaration in the
download area
Dimensions
Width
6.2 mm
Height
110.5 mm
Depth
120.5 mm
Ambient conditions
Ambient temperature (operation)
-40 °C ... 70 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Input data
Configurable/programmable
Yes
Voltage input signal
0 mV ... 1000 mV
Voltage input signal
0 mV ... 750 mV
Voltage input signal
0 mV ... 500 mV