Datasheet

https://www.phoenixcontact.com/us/produkte/2902829
Nov 14, 20131/7
Signal conditioner-MINI MCR-SL-UI-I-LP-NC-2902829
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in
the user's documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
2-way loop-powered isolating amplifier (supplied on the output side), can be configured via DIP
switches, with screw connection technology and standard configuration.
Product Description
The 6.2 mm wide MINI MCR-SL-UI-I-LP... configurable 2-way isolating amplifier is used to electrically isolate, condition, and filter
analog signals.The output loops that supply the loop-powered isolating amplifier enable the isolating amplifier to operate on an active
analog input module. The modules are supplied via the current loop of the controller.On the input side, standard analog signals and
non-standard analog signals can be connected, starting from 2 mA or 50 mV up to 40 mA or 30 V. These are converted to a 4...20 mA
signal.The DIP switches accessible on the housing side enable the configuration of input signal ranges. 
  
Key commercial data
package_quantity
1
GTIN
4046356682350
Technical data
Note:
Utilization restriction
EMC: class A product, see manufacturer's declaration in the
download area
Dimensions
Width
6.2 mm
Height
93.1 mm
Depth
102.5 mm
Ambient conditions
Ambient temperature (operation)
-25 °C ... 70 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Degree of protection
IP20
Input data
Voltage input signal
0 mV ... 1000 mV
Voltage input signal
0 mV ... 750 mV
Voltage input signal
0 mV ... 500 mV
Voltage input signal
0 mV ... 300 mV
Voltage input signal
0 mV ... 250 mV