Datasheet

UNO-PS/1AC/24DC/ 90W/C2LPS
105950_en_00 PHOENIX CONTACT 8
7 Assembly
7.1 Unpacking
Before mounting the power supply unit, it must be checked
for damage:
– Take the device out of its packaging.
– Check the device for any damage sustained during
transport.
– Retain the package slip for future use.
– Dispose of packaging in an environmentally-friendly
way.
7.2 Mounting the power supply unit
Figure 2 Convection
The power supply unit is intended for installa-
tion in a distributor box or control cabinet.
The power supply unit is designed for convec-
tion cooling. Maintain a minimum distance
from other devices in order to ensure convec-
tion cooling.