Data Sheet

https://www.phoenixcontact.com/us/products/2904922
May 3, 20171/4
Current transformer-PACT RCP-4000A-1A-D140-2904922
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in
the user's documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
Set consisting of 2 components: 1 A measuring transducer and a Rogowski coil, length 450 mm.
The measuring coil diameter when installed is 140 mm. The Rogowski coil is used for AC current
measurement for busbars and power lines.

Key commercial data
package_quantity
1
GTIN
4046356900959
Technical data
Measuring transducer supply
Nominal supply voltage
24 V DC -20% ... +25%
Nominal supply voltage range
19.2 V DC ... 30 V DC
Max. current consumption
190 mA
Power consumption
4 W
Measuring coil input data
Frequency measuring range
40 Hz ... 20000 Hz
Position error
< 1 %
Linearity error
0.1 %
Measuring transducer input data
Measuring ranges (current)
100 A 250 A 400 A 630 A 1000 A 1500 A 2000 A 4000 A
Configurable/programmable
Via DIP switches
Phase angle
< 1 °
Rated power
1.5 VA
Measuring transducer signal input
Input signal (at 50 Hz)
100 mV (1000 A)
Input impedance
27 kΩ (smallest measuring range)
Measuring coil signal output
Output signal (at 50 Hz)
100 mV (no load, at 1,000 A)
Output voltage (in no-load operation)
V
OUT
= M * dI/dt
Output voltage (sinusoidal, in no-load operation)
100 mV (V
OUT
= 2 * π * M * f * I (M = 0.318 μH; example: At 50 Hz;
I = 1,000 A))
Measuring transducer signal output
Current output signal
0 A AC ... 1 A