Datasheet

PSR-MS60
106171_en_01 PHOENIX CONTACT 4
General data
Relay type Electromechanically forcibly guided, dust-proof relay.
Nominal operating mode 100% operating factor
Degree of protection IP20
Min. degree of protection of inst. location IP54
Mounting type DIN rail mounting
Mounting position vertical or horizontal
Assembly instructions See derating curve
Dimensions (W/H/D) 6.8 x 93.1 x 102.5 mm
Type of housing PBT yellow
Clearances and creepage distances between the power circuits DIN EN 50178
Rated insulation voltage 250 V AC
Rated surge voltage/insulation Safe isolation, reinforced insulation 6 kV between input circuit and enabling cur-
rent path (13/14) and enabling current path (23/24)
Basic insulation 4 kV between all current paths and housing
Pollution degree 2
Surge voltage category III
Connection data
Connection method Screw connection
Conductor cross section, solid 0.2 mm² ... 2.5 mm²
Conductor cross section, stranded 0.2 mm² ... 2.5 mm²
Conductor cross section AWG/kcmil 26 ... 12
Stripping length 12 mm
Screw thread M3
Ambient conditions
Ambient temperature (operation) -40 °C ... 55 °C (observe derating)
Ambient temperature (storage/transport) -40 °C ... 85 °C
Max. permissible relative humidity (operation) 75 % (on average, 85% infrequently, non-condensing)
Max. permissible humidity (storage/transport) 75 % (on average, 85% infrequently, non-condensing)
Maximum altitude max. 2000 m (Above sea level)
Shock 15g
Vibration (operation) 10 Hz ...150 Hz, 2g
Conformance / approvals
Conformance CE-compliant
Approvals
$
Safety data
Stop category according to IEC 60204 0
Safety parameters for IEC 61508 - High demand
SIL 3
PFH
d
1.5 x 10
-9
(4ADC13; 5AAC15; 8760switching cycles/year)
Demand rate < 12 Months
Proof test interval 240 Months
Duration of use 240 Months