Datasheet

https://www.phoenixcontact.com/gb/products/2905009
06/18/2019Page2/8
DC/DC converters-QUINT-PS/60-72DC/24DC/10-2905009
Technical data
Dimensions
Width with alternative assembly 122 mm
Height with alternative assembly 130 mm
Depth with alternative assembly 51 mm
Ambient conditions
Degree of protection IP20
Ambient temperature (operation) -25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
Ambient temperature (start-up type tested) -40 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Max. permissible relative humidity (operation) ≤ 95 % (at 25 °C, non-condensing)
Climatic class 3K3 (in acc. with EN 60721)
Degree of pollution 2
Input data
Nominal input voltage range 60 V DC ... 72 V DC
Input voltage range 42 V DC ... 96 V DC
Current consumption 5.6 A (60 V DC)
4.7 A (72 V DC)
Inrush current < 9 A (typical)
Mains buffering time typ. 10 ms (60 V DC)
Input fuse 10 A 150 V DC (internal (device protection))
Type of protection Transient surge protection
Protective circuit/component Varistor
Output data
Nominal output voltage 24 V DC ±1%
Setting range of the output voltage (U
Set
)
18 V DC ... 29.5 V DC (> 24 VDC, constant capacity restricted)
Nominal output current (I
N
)
10 A (-40°C...60°C)
POWER BOOST (I
Boost
) 12.5 A (-40°C...40°C permanent, U
OUT
= 24VDC )
Selective Fuse Breaking (I
SFB
)
60 A (12 ms)
Derating 60 °C ... 70 °C (2.5%/K)
Connection in parallel Yes, for redundancy and increased capacity
Connection in series yes
Feedback resistance 35 V DC
Output overvoltage protection < 35 V DC
Max. capacitive load unlimited
Active current limitation 18 A
Control deviation < 1 % (change in load, static 10 % ... 90 %)
< 2 % (change in load, dynamic 10 % ... 90 %)
< 0.1 % (change in input voltage ±10 %)
Residual ripple
< 20 mV
PP
Peak switching voltages nominal load
< 10 mV
PP
(20MHz)