Datasheet
https://www.phoenixcontact.com/us/products/2905813
08/10/2017Page2/3
Timer relay-ETD-BL-1T-230-2905813
Technical data
Ambient conditions
Ambient temperature (storage/transport) -25 °C ... 70 °C
Permissible humidity (operation) 15 % ... 85 %
Noise immunity EN 61000-6-2
Coil side
Input voltage range 24 V AC/DC ... 240 V AC/DC -15% ... +10%
Temperature sensitivity ≤ 0.01 %/K
Function E: With switch-on delay
R: With release delay and control contact
Es: With switch-on delay and control contact
Ws: With single shot leading edge and control contact
Time setting range 50 ms ... 1 h (5 time end ranges)
Recovery time 100 ms
Contact side
Contact type 1 floating PDT
Maximum switching voltage 250 V AC (in acc. with IEC 60664-1)
Interrupting rating (ohmic load) max. 1250 VA (5 A / 250 V AC)
Output fuse 5 A (fast-blow)
General
Status display Green LED (POWER)
Yellow LED (relay active)
Mechanical service life
15 x 10
6
cycles
Test voltage relay winding/relay contact 4 kV
Mounting position any
Assembly instructions on standard DIN rail NS 35 in accordance with EN 60715
Color gray
Permissible humidity (operation) 15 % ... 85 %
Nominal frequency 48 Hz ... 63 Hz
Conformance CE-compliant
UL, USA/Canada UL 508 Listed
Connection data
Conductor cross section flexible min. 0.5 mm²
Conductor cross section flexible max. 2.5 mm²
Conductor cross section solid min. 0.5 mm²
Conductor cross section solid max. 2.5 mm²
Conductor cross section AWG min. 20